Stainless Steel Electric Meat Mincer Machine , Kitchen Small Meat Grinder With 3 Stuffing Tubes

Commercial Grade Meat Grinder Variety of Sausage Funnels Meat Grinding Plate

Trouble-shooting Guide

Description:

• Heavy-duty construction with #12 neck size
• Powerful 2/3 HP(500W) motor
• Grinds up to 5.5lb. of meat per minute
• Reverse function for easily un-jamming your grinder to maximize output
• Includes 2 stainless steel cutting plates 3/16'' & 3/8'', a stainless steel stuffing plate and a stainless steel cutting knife
• Comes with a set of 3/8'', 3/4'' and 1-1/8'' stuffing tubes
• Meat stomper included for accessories storage
• Item# 52021250

Specifications:

Assembly Instructions:

• Insert grinder head into gear housing; be sure that the hopper tray throat is facing upward. Hold grinder head with one hand, place locking knob into the hole on the side of Motor Housing and tighten it clockwise (See Fig 1).
• Insert auger into the grinder head. You may need to turn the auger to align it with the drive shaft of the motor (See Fig 2).
• Place cutting knife blade onto Feed Screw shaft of the auger with the Flat edge of blade facing the front (See Fig 3).
• If blade is not seated properly, meat will not be ground.
• Place desired grinding plate next to Cutting Blade. The notch in the plate should align with the protrusion on the grinder head (See Fig 4).
• Firmly screw ring cap onto grinder head. Do not over tighten (See Fig 5).
• Insert the Hopper meat tray onto the throat of the head (See Fig 6)

meat shredder machine

electric meat mincer grinder

Stainless Steel Electric Meat Mincer Machine , Kitchen Small Meat Grinder With 3 Stuffing Tubes Images